Frigidaire Designer Series, Обслуживание

Страница: 26 / 90

Section 2 Installation Information
2-16
Reassembling the Door
1. Locate and remove the hinge cutout gate from the
outer door assembly. Rotate and move it to the
opposite hole in the outer door. (See Figure 2-26)
2. Rest the opening of the inner door at a 90 degree
angle on the “shoulders” of the hinge cutout gate.
Pivot the inner door down onto the outer door.
(See Figure 2-27)
Figure 2-26.
Figure 2-27.
3. Replace indented head screws (no. 1-5) removed
earlier. Take care not to strip out the plastic holes.
(See Figure 2-28)
4. Replace pan head screws (no. 6-7) removed earlier.
Take care not to strip out the plastic holes.
(See Figure 2-28)
5. Locate new metal strike supplied with dryer manuals.
Grip new strike with pliers as shown below. Firmly
insert the strike so it is oriented vertically.
(See Figure 2-29)
Figure 2-28.
Figure 2-29.
no. 6-7
no. 1-5