Frigidaire CGEF3059RFA страница 40 Скачать руководство пользователя

Страница: 40 / 48

CARE & CLEANING

Plastic or foods with a high sugar content:
These types of soils need be removed immediately if

spilled or melted onto the ceramic cooktop surface.

Permanent damage (such as pitting of the cooktop

surface) may occur if not removed

immediately

After turning the surface elements OFF, use a razor blade

scraper or a metal spatula with a mitt (as illustrated) and

scrape the soil from the hot surface. Allow the cooktop to

cool, and use the same method for heavy or burned on

soils.

Consistent and proper cleaning is essential to

maintaining your ceramic glass cooktop.

o not:

• Slide anything metal or glass across the cooktop.
• Use cookware with dirt or dirt build up on bottom;

replace with clean cookware before using.

• Use your cooktop as a cutting board or work surface in

the kitchen.

• Cook foods directly on the cooktop surface or without

using cookware.

• Drop heavy or hard objects on the ceramic glass

cooktop, they may cause it to crack.

Prior to using your cooktop for the first time, apply

a ceramic cooktop cleaning cream (available in most

hardware, grocery and department stores) to the ceramic

surface. Clean and buff with a clean paper towel. This will

make cleaning easier when soiled from cooking. Cooktop

cleaning creams leave a protective finish on the glass to

help prevent scratches and abrasions.
Sliding aluminum or copper clad bottom pans on the

cooktop can cause metal markings on the cooktop surface.

These marks should be removed

immediately

after the

cooktop has cooled using the cooktop cleaning cream.

Metal marks can become permanent if not removed prior

to future use.
Cookware (with cast iron, metal, ceramic or glass) with

rough or dirty bottoms can

mark or scratch

the cooktop

surface.

Before cleaning the cooktop, be sure the controls are

turned to OFF and the cooktop is COOL.

Cooktop maintenance

Cooktop cleaning

IMPORTANT

CAUTION

For light to moderate soil:

Apply a few drops of cooktop cleaning cream directly

to the cooktop. Use a clean paper towel to clean the

entire cooktop surface. Make sure the cooktop is cleaned

thoroughly, leaving no residue. Do not use the towel you

use to clean the cooktop for any other purpose.

For heavy, burned on soil:

Apply a few drops of glass-ceramic cooktop cleaner

directly to the soiled area. Rub the soiled area using a

non-abrasive plastic type no-scratch cleaning pad, applying

pressure as needed. Do not use the pad you use to clean

the cooktop for any other purpose.
If soils remain, carefully scrape soils with a metal razor

blade scraper, holding scraper at a 30 degree angle to

the surface. Remove loosened soils with cooktop cleaning

cream and buff surface clean.

30°

Содержание CGEF3059RFA

















































Результаты поиска

Содержание CGEF3059RFA

Отзывы:

Похожие инструкции для CGEF3059RFA

Бренды по названию

Популярные бренды

Frigidaire CGEF3059RFA, Инструкция по использованию и уходу

Результаты поиска

Содержание CGEF3059RFA

Отзывы:

Похожие инструкции для CGEF3059RFA

Бренды по названию

Популярные бренды