Frigidaire CGEF3059RFA Скачать руководство пользователя

Страница: 28 / 48

SETTING OVEN CONTROLS

If the error message “

Prob ERR

” displays (Fig. 1), check

to be sure that the probe connector is fully inserted

into the receptacle. If the probe is fully inserted in the

receptacle and the error message continues, the probe

may be defective and need replaced.
When “

Prob ERR

” displays, the oven control will not

permit any oven feature to activate until corrected or the

probe is removed. If the error message continues, remove

the probe from the receptacle and oven.

Probe error message:

Fig. 1

“

Probe Too Hot

”

message:

When the message “

Prob

” ... “

Too

”... “

Hot

” ... flashes in

the display, the probe sensor temperature has exceeded

250°F (121°C). If the probe is not removed this message

may continue until the sensor reaches 300°F (149°C) or

higher, at which time the oven will automatically turn OFF

and display “

Prob ERR

” message.

This message may have been generated if the probe

sensor is exposed to direct oven heat

or the food

internal temperature is over 250°F (121°C). Be sure the

probe sensor is fully covered by the food or if the food is

done, press

cancel

and remove food and probe from the

oven.

Probe

(cont’d)

NOTES

•

During the cooking process the internal food

temperature will display by default. To review the

target temperature press the

keypad once. After

6 seconds the display will revert back to the internal

food temperature.

•

To assure temperature accuracy, do not remove the

probe from the food or receptacle until the desired

internal temperature is met.

•

If the probe is active and the probe is removed from

the receptacle only, the probe feature will cancel but

the oven will continue to cook.

•

If the probe is active and the probe is removed from

the food only, the probe feature will remain active, but

the displayed internal food temperature may no longer

be reliable. This may eventually generate a “

Probe

Too Hot

”

message.

•

The oven will automatically turn OFF if the probe

sensor reaches 300°F (149°C) or more.

•

The probe feature cannot be set with

broil

self-

clean

•

To change the target temperature while cooking,

press the

keypad once. Use the numeric

keypads to change the target temperature. Press the

start

keypad to accept any change.

handle

probe

cable

probe

sensor

Fig. 2

handle

Содержание CGEF3059RFA

















































Результаты поиска

Содержание CGEF3059RFA

Отзывы:

Похожие инструкции для CGEF3059RFA

Бренды по названию

Популярные бренды

Frigidaire CGEF3059RFA, Инструкция по использованию и уходу

Результаты поиска

Содержание CGEF3059RFA

Отзывы:

Похожие инструкции для CGEF3059RFA

Бренды по названию

Популярные бренды