9
AM
11
OFF
FRR145
55
OFF
FRR146
Press and hold the MIN button (Figure 7) for 3 seconds. The
icon and
"OFF" will appear on the display
Press the or
button to adjust the hour. Press the TIMER SET button
(Figure 7) to save hour setting and go to minutes. The example below is
showing a stop hour of 11 AM.
Use the
or
button to adjust the minutes. Press the TIMER SET button
(Figure 7) within 15 seconds to exit and save the setting. The example below
is now set to turn off at 11:55 AM, once the Timer is activated.
The display will return to normal once the settings are saved.
NOTE: Setting the Timer's start and stop times do not activate the timer.
To activate the timer, you must press the
button.
Timer Activated Scenarios
FRR157
Once the Timer's Start and Stop times have been saved, you can activate
the Timer by pressing the
button..
Set Timer: Setting the Stop Time
SET POINT
F
AUTO FAN
79
FRR159
If the Timer function is activated during the ON time, the Timer
icon
illuminates and the unit will continue to run in the existing mode (system
mode, fan mode, fan speed, set temperature, etc.) until the set OFF time
occurs. See the example below:
When the set OFF time occurs or the Timer function is activated during
the OFF time, the unit will turn off, but the
icon will remain illuminated,
as shown below.
To deactivate and shut off the Timer, press the
button again. Whether
in the ON or OFF times, the icon disappears. If the unit was in an ON
time, the unit will stay in the current state. If the unit was in an OFF time,
the unit will turn back on in the last state operated.
TIMER and PRE-PROGRAMMED SCHEDULING
The TIMER SCHEDULE
has three options:
24-Hour Timer -
System default. (already covered)
Residential Schedule
(option 1) – 40 Hr. Work Week:
This option causes your unit to raise temperatures to 85°F during the typical
work day, lower them again to 78°F prior to the time when most people will
return home, and raise slightly to 82°F overnight.
Commercial Schedule
(option 2) - 5 -Day Business Week
This option causes your unit to raise temperature to 84°F after typical
working hours and on weekends when commercial spaces are typically
unoccupied.
(Refer to Addendum 1 in the back of this manual for both Residential and
Commercial Schedule Tables.)
To select between these 3 options, press and hold the
button
for 3 seconds. You will then be able to toggle between Timer (default),
Residential Schedule (1) and Commercial Schedule (2) by pressing the
or buttons. See below for images of each option.
FRR139
24-Hour Timer
(system default)
.
Timer/Schedule Select
