Friedrich MRM09Y1J, Руководство по обслуживанию и запасным частям

Страница: 28 / 135

28 PB
OPERATION
Figure 301
Remote Control Button Identification
1 START / STOP:Press to start or stop operation.
2
:Press to decrease temperature setting.
3
:Press to increase temperature setting.
4 FAN AUTO: Press to set fan speed.
5
MODE: Press to select operation mode (AUTO/COOL/DRY/FAN/HEAT).
6
SENSOR
7
CLOCK: Press it set clock.
8
TIMER ON: Press it to set auto-on timer.
9 AIR SWEEP:Press it set swing angle.
10 EXTEND
11 TEMP
12 TIMER OFF:Press it to set auto-off timer.
13
TURBO
14
SLEEP
15 LIGHT:Press it to turn on/off the light .
3
9
10
13
12
5
4
11
8
7
2
1
6
15
14
16
21
22
23
17 18 19 20
24
27
26
25
MODE icon:If MODE button is pressed, current operation mode icon (AUTO),
18
is displayed when pressing
the AIR SWEEP button.Press this button
SLEEP icon : is displayed by pressing the SLEEP button. Press this button
again to clear the display.
TEMP icon:Pressing TEMP button, (set temperature),
(indoor ambient
temperature),
(outdoor ambient temperature) and blank is displayed circularly.
19 AIR SWEEP icon:
again to clear the display.
16
17
LOCK icon: is displayed by pressing “ ” and “ ” buttons simultaneously.
LIGHT icon:
again to clear the display. is displayed by pressing the LIGHT button. Press LIGHT button
21
20
TURBO icon:
again to clear the display.
DIGITAL display:This area will show the set temperature.
Press them again to clear the display.
SET TIME display:After pressing TIMER button, ON or OFF will blink.This area will
show the set time.
SENSOR icon: is displayed when pressing the SENSOR button. Press this
is displayed when pressing the TURBO button.Press this button
button again to clear the display.
FAN SPEED display:Press FAN button to select the desired fan speed setting
(AUTO-Low-Med-High).Your selection will be displayed in the LCD windows
,
except the AUTO fan speed.
EXTEND icon: is displayed when pressing the EXTEND button. Press this
button again to clear the display.
22
23
24
26
25
27
(COOL), (DRY), (FAN) or (HEAT)(only for heat pump models) will show.
15
12
13
8