Friedrich FRESHAIRE PVH09K3FA, Руководство по обслуживанию и запасным частям

Страница: 36 / 109

36 PB
INSTALLATION
Alternate Wall Installations
8
13-¾ "
Figure 8
Wall Sleeve Attachment
WALL
SLEEVE
ALTERNATE
FASTENING METHODS
(Field Supplied)
WOOD SCREW
TOGGLE BOLT
NOTE: The Wall Sleeve must be
horizontally level (side-to-side)
and pitched 1/4 bubble to the
outside when installed in an
opening.
The mounting hole location
EXPANSION
ANCHOR BOLT
should be approximately 2-4”
from the top and bottom of the
sleeve.
MOUNTING
HOLES
PLASTIC ANCHORS
SCREWS
FRP008
Figure 9
Dimensions
A
¼"
MIN.
A B C
Dimension* Allow
for wall
finishing
Allow
for floor
finishing
Allow
for proper
drainage
(Minimum) Min. Max. (Front-to-Back)
C No Accessories
¼" ¼"
--- ---
With Subbase 1-¾" 3-½" 5"
---
With Lateral Duct
¾" ¼"
--- ---
Wall Sleeve Tilt
B
--- --- ---
¼"
WALL
* If more than one accessory is to be used, use the maximum
dimension. If the wall thickness is more than 13-¾" - (A+ ¼"),
a sleeve extension must be used.
FRP009