background image

This Installation and Operation Manual has been designed to insure maximum satisfaction in the performance of your unit.  For 

years of trouble-free service, please follow the installation instructions closely.  We cannot overemphasize the importance of 

proper installation.  We have added new information to the basic instructions to help you achieve success.

General Instructions

     

WARNING

Please read this manual thoroughly prior to equipment 

installation or operation.  
It is the installer’s responsibility to properly apply and 

install  the  equipment.    Installation  must  be  in 

conformance with the NFPA 70-2008 National Electric 

Code or current edition, International Mechanic Code 

2009 or current edition and any other applicable local 

or national codes.
Failure  to  do  so  can  result  in  property  damage, 

      

personal injury 

and / 

or death.

     

WARNING

Refrigeration system under high pressure.

Do not puncture, heat, expose to flame or incinerate.
Only  certified  refrigeration  technicians  should  service 

this equipment.
R410A systems operate at higher pressures than R22 

equipment.  Appropriate  safe  service  and  handling 

practices must be used.
Only use gauge sets designed for use with R410A. Do 

not use standard R22 gauge sets.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual 

and on your appliance. Always read and obey all safety messages. 

This is a safety Alert symbol. This symbol alerts you 

to  potential  hazards  that  can  kill  or  hurt  you  and 

others.

All  safety  messages  will  follow  the  safety  alert 

symbol with the word “WARNING” or “CAUTION”. 

These words mean:

WARNING

Indicates  a  hazard  which,  if  not 

avoided,  can  result  in  severe 

personal injury or death and damage 

to product or other property.

CAUTION

Indicates  a  hazard  which,  if  not 

avoided, can result in personal injury 

All safety messages will tell you what the potential hazard is, tell you 

how to reduce the chance of injury, and tell you what will happen if 

the instructions are not followed.

and  damage to product or other property.

NOTICE

Indicates  property  damage  can 

occur  if  instructions  are  not 

followed.

2

Содержание CP15F10





















Отзывы: