FRICON LSMR120M1A, Эксплуатация и обслуживание

Страница: 38 / 204

SMR
English
38
1.
Glass Cover
2.
Handle
3.
Controller
4.
Drain Cap
5.
Feet
6.
Condenser and Fan
7.
Compressor
1. Introduction
You have purchased Fricon equipment. Our goal is to provide our customers with a
wide range of high-quality equipment while maintaining the premise of high efficiency
and low consumption in order to meet the diverse needs of customers operating in the
Food Retail segment. When developing this equipment, FRICON took into
consideration its environmental impact, mainly the gas used R290. R290 refrigerant has
no effect in the ozone layer and has a very low greenhouse effect potential. Both R404a
and R452a refrigerants are registered in the Kyoto protocol and both have a low
greenhouse effect potential.
In order to ensure the best quality of the product, during the manufacturing the
products are subjected to rigorous safety and operational tests, which attest to reliability
and control the safety required by national and international standards in various areas.
The standards to which the product is in compliance can be found under the point "Lines
UPD and SMR Declarations of Conformity”.
To reach the equipment’s maximum performance we recommend that you read this
instruction manual carefully. It contains important instructions for installation, operation
and maintenance. If you need support, FRICON is at your disposal through the various
contact channels available.
2. Description of the Equipment
Fig.3 - Example of SMR equipment