SIRe Advanced Air Curtains Electric
31
GB
Main menu
Fan control
Current settings
Temperature settings
Main menu
Fan control
Current settings
Temperature settings
Main menu>Temperature
settings
Room temp. day
Room temp. night
Current settings
Room temp. day
Room temp. night
High speed limit
Speed closed door
Week program
Step 5
Step 1
No program
20°C
18°C
Main menu
System on/off
Temperature settings
Fan control
Main menu>Fan control
High speed limit
Main menu>Fan control
High speed limit
Speed closed door
Main menu>Fan control
High speed limit
Speed closed door
Main menu>Fan control
Speed closed door
Step 1
•
Step 5
•
Main menu
Installer menu
Fan control
System on/off
Main menu
System on/off
Fan control
Installer menu
Main menu>Installer menu
Enter password
(See manual)
0 0 0
0
Main menu>System on/off
System on/off
•
ON
Main menu
Current settings
Shows the current room temperature, high speed
limit, speed closed door and week program status.
Temperature settings
Set the desired room temperatures to apply for
day respectively night mode, when the door is
closed (room temperature night is used for week
program/night reduction).
At open door these set point values automati-
cally increase with a set point differential that can
be set under Installer menu > Heat settings> Open
door setp. diff. (Factory setting 3.0 K).
Fan control
Possibility of setting high speed mode at an open
door and what speed should apply with a closed
door (3 or 5 steps depending on the unit).
Factory setting
High speed limit: 3 resp. 5 (1-3, resp. 1-5)
Speed closed door: 1 (Off-3, resp. Off-4)
System on/off
Switch the whole unit off manually. In Off the
display goes out; as soon as a button is pushed the
display lights and shows System on/off. To activate
the unit again select On.
The unit’s safety functions are still active when
the system is switched off, which means that the
fan can continue to run for a moment after mode
Off has been selected.
Installer menu
The installer menu is at the bottom of the main
menu, this is password protected. See Installer
menu in this manual.
Factory setting
Room temp. day: 20°C (5 – 35°C)
Room temp. night: 18°C (0 – 20°C)
