FRIATEC FRIAMAT BASIC ECO, Руководство по эксплуатации

Страница: 24 / 44

24
5.4.2 Operator pass
IMPORTANT!
The menu “Operator pass” is activated (and thus
visible to you) only once an operator pass has
been read in – with the documentation switched
on. You can order operator passes from
FRIATEC. Once an operator pass has been read
in, all fusion processes carried out will be saved
under the code of this operator pass. By reading
in a different operator pass your FRIAMAT
® -
model will be switched over accordingly.
IMPORTANT!
Once you have read in the operator pass you will
automatically be taken to submenu „ID Data“
(see also Section 5.9.1). By moving the blue
arrow buttons (up/down) you will be given an
overview of the settings that have been selected
on your FRIAMAT
® -model. Press the STOP but-
ton to exit this submenu.
IMPORTANT!
By means of the operator pass your FRIAMAT ® -
model can be blocked to prevent it from unautho-
rised use. After repeated reading in of the current
operator pass the question will be posed “BLOCK
UNIT?”. By pressing the appropriate button you
can confirm this or cancel the action. Your
FRIAMAT
® -model will be blocked automatically
when the code of an operator pass is on file and
there has been a change of date, i.e. your
FRIAMAT
® -model is blocked the next day. In both
cases (manual or automatic blocking) the follow-
ing message appears in the display “OPERATOR
“
CODE”. By reading in an operator pass your
FRIAMAT ® -model is once again cleared for use.
FT_2377e_II_07_GB.qxd 13.02.2007 12:31 Uhr Seite 24