Fri-Jado STW5, Руководство по установке

Страница: 5 / 22

Page 5 Installation Manual STG5/7 STW5/7 form 9123656 rev. 03/2010
INSTALLATION PROCEDURES
INSTALLATION PROCEDURES
• Unpacking of the unit.
• Remove the pallet under the unit with the help of a fork lift.
• Put the unit on his location.
• Check if there is enough free space around the unit (see installation drawing).
• Check the electrical supply.
• Tethering of the unit
• STG: Load a program in the memory and make a test run on 250°C.
• STW: Make a test run on 100°C.
• Give instructions to the operator.
UNPAckING ThE UNIT
Immediately after unpacking the oven, check for possible shipping damage. If the oven is
found to
be damaged, save the packaging material and contact the carrier within 15 days of delivery.
REMOVAL Of PALLET
The standard way to remove the rotisserie or
warmer from a pallet is with a fork lift. See
pictures. Open door and remove the drawer.
Lift the unit from pallet and put the unit in
its place.
Note:
when lifting a stacked unit, always use
the drawer of the bottom unit.
Another possibility is to disassemble the pal-
let. For the pallet of the STG 7 and STW 7
follow the procedure on the photo.