manualshive.com logo in svg

Fri-Jado Deli Multisserie with GC and condensor, Руководство по обслуживанию

Поделиться
Скачать
Fri-Jado Deli Multisserie with GC and condensor Скачать руководство пользователя страница 17

Page 17 

Programming Instructions

Service Manual Deli Multisserie   form 9123560  rev. 02/2017

THE USB FEATURE IN THE 9172552 BOARD.

Mini USB port
USB port

•  From the first release in November 2012, it was possible to upgrade 

the sw version by means of a USB stick.

•  From V5.00.14, recipes can be exchanged by means of a USB stick. 

This is a temporary solution and will only function in case of the 
same software version. (also the same device type).

•  From V5.01.03, USB communication is available for saving and loa-

ding files, but also this was temporary.

•  From V5.02.07, June 5th 2015, communication has been made more 

convenient. Files form version V5.01.03 can be used in this version.

USB COMMUNICATION AND SCREEN OPTIONS

How to read out the software version (firmware).

1.  Switch ON the unit. (push 3 sec.)

2.  Push the <settings> tab.

3.  Select “information”

4.  Read out the version

SOFTWARE UPGRADE

Press  <settings>.

There are three different options in this screen,  “in-

formation”, “manager” and “service”.

To access the different sections, select an option using 

the dial or up and down keys and confirm with <OK> .

To leave a section use the “cancel” key.

Note:

 The service section is by default protected with 

the password (pin code) “4878”. 

Note:

 The manager section can be protected by a 

seperate password, this password can be set inside the 

manager menu. It is possible to view this password 

through the service menu.

Содержание Deli Multisserie with GC and condensor



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды