Fresmak BLOCK-SC, Руководство по обслуживанию

Страница: 11 / 28

8 9
The work team must, as a minimum, comply with the following guidelines:
Tight clothing must be worn. Said clothing must help to avoid entrapment injuries.
Protective footwear must be worn in order to avoid injuries caused by falling pieces. The
soles of said footwear must be non-slip to avoid falls due to slipping.
The work equipment must include protection goggles, as well as
gloves and helmets should they be necessary.
2.5 Special risks.
In every country’s professional health and safety regulations it is obligatory to carry out a labour risk
assessment for every work post. From the conclusions that arise from said assessment the necessary
preventative measures to avoid any type of unusual risk are to be enforced
These measures may not be reflected in this manual.
Respecting these measures will help the operator to reduce risks to their own health as well as avoiding
dangerous situations for other people, the installations and the machines.
2.6 Handling the block.
Individual blocks do not present serious handling risks but when various are placed on
plates to be used together the weight increases and they must be handled in adherence
to the obligatory professional health and safety regulations.
The use of lifting devices such as cranes and hoists must always be resorted to if
necessary. For this purpose individual blocks or those on plates are equipped with
threaded holes where lifting eyes can be attached allowing them to be mechanically
lifted.
In order to avoid dangerous situations:
• The operator must never position themselves underneath the load.
• Designated slings must be used in accordance with the weight that is to be lifted.
• Single-use slings are to be discarded after use. Slings that appear to be broken or in
poor condition are never to be used.
• The centre of gravity of the piece must always be found before initiating movement..
• Blows to the protruding edges of the machine are to be avoided.
2.7 Assembly instructions. Functional tests
The blocks cannot be attached to a machine that does not meet the requirements
outlined in directive 2006/42/CE.
Risk of injury from movement of components. Risk of entrapment.