03
FRX 110
S /
200
S
Installation & Disassembly
1. On receipt of the product
When unpacking the unit, check that there has
been no damage in transit. The unit is packed at the
factory to withstand normal logistics. Installation of
a damaged unit is not permitted. Do not lift the unit
using connection sockets or electrical cables.
The product contains the following:
•
1 x Heat recovery unit
•
1 x Control panel
•
1 x Installation manual
NB:
Assembly, adjustment and test operation as
described in these instructions must be performed
by appropriately authorised personnel.
2. Safety regulations
•
Units are only intended for the ventilation of
buildings and must not be used for any other
purpose.
•
Do not use the unit in explosive environments or
in connection with combustible, aggressive and
easily flammable gases.
•
Never use the unit without a filter.
•
Prior to service and maintenance work
commencing, disconnect the mains fuses/
sockets to ensure there is no electrical power
supply to the unit. Please wait 3 minutes before
opening the front hatch.
•
The fans must be given time to stop, and the
post-heating battery must cool.
•
Do not disassemble or modify the unit as this
may result in mechanical faults or damage.
•
Never use a damage power cord.
•
The unit should be assembled on an even and
stable surface.
•
Do not use water or other fluids for cleaning
electrical components or connections.
•
Never connect the unit to the electrical supply
in conditions other than those stated on the unit’s
label (on the top).
