MI
LJÖMÄRKT
341
TRYCKSAK 0
53
FRESH AB
Gransholmsvägen 136
Tel.
+45 (0)470 70 77 00
SE-355 99 GEMLA
Fax
+46 (0)470-70 77 39
Web
www.fresh.se
Production: Fresh Marketing • Installation & Disassembly FRX110-200S • Edition 2017 • Art. no. 829013
Copyright © Fresh AB 2017. All rights reserved. Fresh® and the Fresh® logotype are trademarks or
registered trademarks of Fresh AB in Sweden and/ or other countries.
FRX 110
S /
200
S
Installation & Disassembly
7. Disassembly and recycling
Necessary tools
•
Screwdrivers or screw removers. Torx,
Phillips and hexagonal
•
Polygrip input
•
Wrench
•
Hammer
•
Pliers
Disassembly/Assembly
Open hatches/doors using the unit’s key.
Remove filters, fans, heat exchangers, batteries, etc.
Release fans from mounting plates (wrench).
Section
Material
Handling
Panels and doors
Plate AZ185 and rock wool
insulation
Recycling after separation
Metal parts
Plate AZ185, steel, galvanized steel,
powder-coated steel
Recycling
Heat exchanger (air-air)
Aluminium, steel
Recycling after separation
Air heater
steel, galvanized steel (composite)
Recycling after separation
Sealing strip, vibration damping
EPDM
Energy recovery (heat plant)
Air filter
Fibreglass media, galvanized steel
frame
Energy recovery (heat plant)
after separation
Fastening material
Galvanized steel, aluminium
Recycling
Sealing compound
Acrylic, MS Polymer
Energy recovery (heat plant)
Muffler material
Synthetic fibre
Energy recovery (heat plant)
Motors
Composite
Recycling after separation
Control and electrical components
Composite, electrical products
Recycling by authorised company
Packaging
Wood, plastic film, card, cardboard Recycling, Heat recovery
