13
“BIM”, “TIME COUNT”, “DISTANCE COUNT”, “CALORIES COUNT”, “Heart Rate”,
“MANUAL MODE”, “ALPINE” PASS", "5K LOOP", "TRAINING TOOLS", "FOREST WALK",
"TRAILBLAZER", "10K LOOP", "RANDOM HILL".
2.
"REST" is the return key: press this key to return to the standby interface;
“START/STOP”: If the power is switched on and safe lock is ok,the treadmilll can be
started or stopped by pressing this key at anytime
4. “SPEED+” and “SPEED-” are speed addition and subtraction keys: standby state,
used to adjust the set value. It is used to adjust the speed after starting, and its adjustment
range is
0.1
km/time.
5, "INCLINE ↑", "INCLINE ↓" is the slope plus or minus button: standby state, used to
adjust the set value. It is used to adjust the slope after starting, and the adjustment range is
1 segment/time.
6, "1, 2, ... 9, 0, Delete, ok" for speed, slope shortcuts.
Third, quick start (manual mode):
1.
Turn on the power switch and properly attach the magnetic safety lock to the
safety lock position below the panel.
2.
Press “START” to start the stop button, the system will enters the 3 second
countdown, the buzzer sounds, and the “Central dot matrix display area window” window
displays the countdown number. After the 3 seconds countdown, the treadmill will be at 1
km/h. start operation.
3.
After starting, use the “SPEED+” and “SPEED -” keys to adjust the speed of the
treadmill. Use
the “INCLINE↑”
and “INCLINE
↓”
keys to adjust the gradient of the treadmill.
Fourth, the operation during the movement:
1.
Press the deceleration button to decrease the running speed of the treadmill.
2.
Press the accelerator button to increase the running speed of the treadmill.
3.
Press the slope button to decrease the slope of the treadmill.
4.
Press the slope button to increase the slope of the treadmill.
7.
Press the stop button to slow down the running opportunity until it stops running.
8.
When the athlete holds the heartbeat handle with both hands, the heartbeat
data is displayed for about 5 seconds.
Fifth, manual mode:
In the standby mode, press the “START/STOP” button directly, the treadmill starts
running at 1.0 km/h speed and slope 0; other windows start counting from 0, press
“INCLINE↑”,
“INCLINE
↓”,
“ The SPEED+”, “SPEED -” keys change the slope and speed.
After using “SPEED+” and “SPEED-” to modify the speed, use the numeric keypad to
set
the corresponding speed shortcut; after using “INCLINE↑” and “INCLINE↓” to modify the
slope, use the numeric keypad to set the corresponding gradient shortcut. . The Delete
button is the undo button and Ok is the confirmation button.
Sixth, built-in automatic program:
In the standby state, press the “PROGRAM” button to enter the editable countdown
mode. The “TIME” window displays “30:00” and flashes. Press the “SPEED+” and “SPEED
-” buttons to set the exercise time. The range is from 5:00 to 99:00.
The system has 8 built-in automatic programs, and displays the corresponding
program map in the “Central Dot Matrix Display Area”. At the same time, the “TIME”
window
