BT 2018 Lukas 136/170 – 01
Version – 05/2018
- 6 -
Fig. 11
1.3 The rear frame is colour coded.
RED
:
left
GREEN:
right
(looking at the bed from the door side)
Position the rear frame between the foot end and the head
end according to the colour coding and attach using the
enclosed flat head screws (M8 x 100 mm) (Fig. 12).
Then screw on the two rear frames and the upper crossbeam.
Fig. 12
1.4 The two door units are colour coded.
RED
:
left
GREEN:
right
(looking at the bed from the door side)
Screw the first door unit to the head end/foot end of the
bed frame according to the colour coding using the enclosed
screws (M8 x 100 mm). (Fig. 13).
Then attach the second door unit accordingly.
Fig. 13
Insert or remove
spacers
betwen the door unit and the head end/foot end as required
in order to achieve the
correct clearance
between the two door units (
7mm
).
1.5 The outer doors are secured/opened using a lock in
the edge of the door
(Fig. 14).
The middle doors are locked
using a simple patent lock. Move the hand lever of the patent
lock along the groove to close or open the door (Fig. 15).
There are two patent locks at the bottom and one at the
top (Fig. 16).
The doors can also be secured using a sliding
rail (Fig. 16 + Fig. 17).
Fig. 14
Fig. 15 Fig. 16
Fig. 17
