BT 2018 Lukas 136/170 – 01
Version – 05/2018
- 5 -
Move the bed base down to the level of the bed frame
Align the bed base (Fig. 7).
Move the lifting scissors to the uppermost position.
Screw the wooden bed base onto the lifting scissors adapter
using the enclosed flat head screws (4 x 35 mm) (Fig. 8).
Fig. 7
Fig. 8
If present, connect the cable for the dual motor to the control unit (Fig. 9).
The control unit is located on the lifting scissors.
Mount the protective cover on the control unit.
When laying the cable, make sure that the cable cannot be crushed or damaged!!!
Fig. 9
Fig. 10
Mount the protective guard (Fig. 11) using the
enclosed flat head screws (M6 x 25).
Fig. 11
