BT 2018 Lukas 136/170 – 01
Version – 05/2018
- 16 -
4. ANNEX
4.1
General instructions
-
Maintenance/safety checks must only be carried out by persons with the
appropriate qualifications.
-
All other laws and DGUV regulation 3 remain unaffected.
-
Repair of all electrical components must be carried out
exclusively
by
persons
authorised by the motor manufacturer
.
-
Inspection intervals
:
When the bed is first put into use and every time it is re-used.
Maintenance/safety check
once a year or every 12 months
.
Visual and function check of all mech electrical parts.
Electrical inspection in accordance with DIN EN ISO 62353.
-
Inspections performed as part of the scheduled maintenance work can be
performed on the installed system (at site of installation). All other repairs must
be performed at a suitable place of work.
-
Only the installation of original parts is permitted. The use of self-made parts will
cancel all liability and warranty obligations on the part of the manufacturer.
Spare parts lists can be obtained from the manufacturer.
-
System modifications and additions require the manufacturer’s written approval.
-
Complete functional checks must be performed after all maintenance and
repairs. Make sure that there are no collisions between moving parts so that
there are no hazards for patients or third parties and no damage to materials.
-
Instructions and a check list form are provided below so that you can document
your work.
