FreeWave FUSION-SAT, Быстрый старт

Страница: 9 / 13

1
FUSION SATELLITE
Quickstart Guide
©2022 FreeWave Technologies. All Rights Reserved. FreeWave Technologies and the stylized logo are trademarks of FreeWave
Technologies. All other trademarks are the property of their respective owners.
FCC Supplier's Declaration of Conformity
FreeWave Technologies, Inc.
5395 Pearl Parkway, Boulder, CO 80301
Phone Number: 303.381.9200
Website: www.freewave.com
FreeWave Technologies declare under our sole responsibility that the product Models: FUSION-SAT complies with
Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation
The content of this guide covers FreeWave Technologies, Inc. models sold under FCC ID: 2AVE9-TILE01.
All models sold under the listed FCC ID(s) must be installed professionally and are only approved for use when
installed in devices produced by FreeWave Technologies or third party OEMs with the express written approval
of FreeWave Technologies, Inc. Changes or modifications should not be made to the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Part 15 Class A
Note : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the User-Reference Manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at their own expense.
FCC NEMA Installation and Label
Where applicable, the models described in this guide must be installed in a NEMA enclosure. When any FreeWave
Technologies, Inc. module is placed inside an enclosure, a label must be placed on the outside of the enclosure.
The label must include the text: " Contains FCC ID: 2AVE9-TILE01. "
ISED Notifications
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN ICES-3 (A)/NMB-3(A)
Ce dispositif est conforme aux normes permis-exemptes du Canada RSS d'industrie. L'opération est sujette aux
deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence, et (2) ce dispositif doit accepter
n'importe quelle interférence, y compris l'interférence qui peut causer le fonctionnement peu désiré du dispositif.
CAN ICES-3 (A)/NMB-3(A)
ISED Host Installation and Label
The content of this documentation covers FreeWave Technologies, Inc. models sold under IC: 2329B-PMT0101AB.
When any FreeWave Technologies, Inc. module is placed inside a Host, a label must be placed on the outside of
the Host. The label must include the text “ Contains IC: 25817-TILE01 ".
Professional Installation
All models sold under the listed IC ID must be professionally installed.
Only FCC and IC approved antennas may be used.