Freeview DTVS-DSR1, Руководство пользователя

Страница: 7 / 48

7
Product Overview
Front Panel
Rear Panel
LNB IN
LNB OUT
TV ANT IN
TO TV
USB
HDMI VIDEO R
L
YCbCr
L - AUDIO - R S/PDIF
Z1082
AC 110-240V~
50/60Hz 30W Max.
13/18V
500mA Max.
5 6 7 9 8 4 3 2 1
1. button
To switch the receiver between on and Off mode.
2. CH +/- button
- To switch between channels.
- Press to navigate up and down within the
menu setup.
3. VOL +/- button
- To increase and decrease the volume.
- Press to navigate left and right within the menu
setup.
4. MENU button
To open the menu so that you can change the
settings of your receiver.
1. LNB IN
Connect to your satellite antenna.
2. LNB OUT
Connect to your TV if supported satellite or your
another receiver.
3. USB
Upgrade for your recevier or use external hard
drive to record.
4. HDMI
Output the high quality video and audio to your
TV via HDMI cable.
5. TV ANT IN
Input the TV antenna to your receiver.
5. OK button
To confirm selection in OSD menu/display TV
channel list.
6. LED Display
To display the status of the receiver, in playing
menu it shows "MENU"; in watching TV channel it
shows the channel No.; in standby mode it shows
the time; in searching channels it shows "TUNE".
7. LED indicator light 1
Will appear in red when in standby mode.
8. LED indicator light 2
Will show in amber while watching Live TV.
Will show in green when recording.
9. IR receiver
1
2 4 6 8 9
3 5 7 10 11
6. TO TV
Connect to your TV via coaxial cable.
7. YCbCr
Output the high quality video to your TV via RCA
cable.
8. SPDIF
Output the digital audio.
9. AUDIO L/R
Connect to your TV or other equipment.
10. Video
Connect to your TV or other equipment.
11. AC IN Socket
DTVS-DSR1.indd 7 11-6-28 上午9:27