Freeview DTVS-DSR1, Руководство пользователя

Страница: 14 / 48

14
First Time Installation
After all the connections have been made
properly switch on your TV, make sure the
receiver is connected to the mains. If you are
using the receiver for the first time or restored
to factory default the Weclome Screen will be
displayed and then press the OK button to auto
scan.
When the receiver has finished scanning,
all active channels found will be stored
automatically. The first found channel will be
viewed. If you want to stop scanning, press the EXIT button to exit and the channels already found
will be stored.
Switch Program
1. Press the numeric buttons (0~9) on the remote control to select the channel you want.
2. Press the CH+/- buttons on the remote control or the front panel to change the available
channels up and down.
3. Press the BACK button to view the previous channel selected.
Volume Control
• Press the VOL+/- button on the remote control
or front panel to adjust the volume and the
volume bar will be displayed.
• Press the button to switch the sound off. If you want to cancel this function, you can press the
button again or press the VOL+/–.
Text
• Press the TEXT button to enter MHEG if MHEG is transmitted.
• Press the TEXT button again or press the EXIT button to exit the MHEG (TV mode).
DTVS-DSR1.indd 14 11-6-28 上午9:27