P5F97/P5F103 User’s Manual
25
5. IDE Connectors (Two 40-pin Block)
An IDE drive ribbon cable has 40 wires and 2
connectors to support two IDE drives. If a rib-
bon cable connects to two IDE drives at the
same time, one of them has to be configured as
Master and the other has to be configured as
Slave by setting the drive select jumpers on the
drive. Consult the documentation that came
with your IDE drive for details on jumper loca-
tions and settings. You must orient the cable
connector so that the pin 1(color) edge of the
cable is at the pin 1 of the I/O port connector.
6. Wake on LAN Connector:
This 3-pin header is used for remote wake up of the computer through a
network.
7. Back Panel Connectors
The back panel provides external access to PS/2 keyboard/mouse
connectors, two serial port connectors, one parallel port connector, dual
USB port connectors, game/MIDI port connector and microphone/Line-
in/Line-out connectors which are integrated on the mainboard.
Chapter 2:Hardware Installation
8
2
4
4
3
E
X
ID
E
2
ID
E
1
1
WOL
Pin Assignment
1. +5V
SB
2. GND
3. Wake-up signal
8
2
4
4
3
E
X
ID
E
1
ID
E
2
PS/2 Keyboard
PS/2 Mouse (TOP)
USB1
USB2
Parallel Port (TOP)
COM1
COM2
PCB
Microphone
Line-Out
Game/MIDI port (TOP)
Line-In
