manualshive.com logo in svg

Freetech P5F103, Руководство пользователя

Поделиться
Скачать
Freetech P5F103 Скачать руководство пользователя страница 18

18

P5F97/P5F103 User’s Manual

The P5F97/P5F103 not only complies with EPA, APM1.2 and ACPI 
(Advanced Configuration and Power Interface), but also provides the 
following power management features.
- 

Power-on by an external modem ring in or a watchdog timer (Alarm)

System could be powered on by phone ring, or by software that has 
requested the PC to wake up at a preset time.

- 

Power Management mode indicator

The standby LED will blink once a second when system entering 
DOZE Mode and blink twice a second when system entering 
STANDBY Mode. When system entering SUSPEND Mode, standby 
LED will stop blinking and stay on. 

- 

Fan off in suspend mode

The CPU cooling fan will be turned off when the system is in 
suspend mode. (required cooling FAN cable connect to motherboard 
FAN connector).

1.14 System Power On/Off Control

If Micro-ATX or ATX power supply is used, you may enjoy a lot of 
special features as mentioned in the following. System power can be 
turned on by network card (WOL), power button, an external modem 
ring, an alarm. To enable the “Wake On LAN” feature, the option 
“Resume by LAN” in the BIOS Power Management Setup has to be set 
to “Enabled”.To enable the “modem ring on” feature, the option 
“Resume by Ring” in the BIOS Integrated Peripherals Setup has to be 
set to “Enabled”. To enable the “alarm on” feature, the option “Resume 
by Alarm” in the BIOS Integrated Peripherals Setup has to be set to 
“Enabled”. 

System power can be turned off in one of two ways: a front panel power 
button or soft-off control. When the option “PWR-BTTN” in the BIOS 
Power Management Setup is set to “Power Off”, pressing the power 
button will immediately turn off the system power. But if the “PWR-
BTTN” option is set to “Disabled”, you have to press the power button 
and hold it for more than 4 seconds to turn off the system power. The 
system power can also be turned off via software control. The system 
BIOS will turn the system power off when it receives the proper APM 
command from the Operating System. For example, Windows 95 will

Chapter 1: Introduction

Содержание P5F103

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды