DEMO9S08QE8 User Manual
5
be able to connect in a serial fashion to the microcontroller without the actual
use of serial port hardware.
The DEMOQE Terminal Window Utility, included in the DEMOQE Toolkit on
the accompanying CD-ROM, is a generic serial port utility which works with
the DEMOQE virtual serial port or actual serial port hardware.
2.4
DEMOQE Daughter Card Features
•
Four bottom-mounted asymmetrically positioned 8x2 female
connectors to mate with the DEMOQE Base Board
•
A top-mounted MC9S08QE8CLC chip
3
SYSTEM SETUP
3.1
Overview
P&E’s Embedded Multilink driver is required to operate the DEMO9S08QE8
using a PC. The Embedded Multilink driver should be installed with the
CodeWarrior Development Studio software or from the DEMOQE Resources
in the CD-ROM before the PC is connected to the DEMO9S08QE8.
3.2
Operating System Requirements
The following are the resources required to run the CodeWarrior Development
Studio and the DEMO9S08QE8:
•
A PC-compatible system running Windows 2000, Windows XP, or
Windows Vista
•
128MB of available system RAM, and 1GB of available hard disk
space
•
A CD-ROM drive for software installation
•
A USB port
3.3
Software Setup
3.3.1
Installing CodeWarrior Development Studio
To install the CodeWarrior Development Studio, insert the CodeWarrior CD
