Freescale Semiconductor P&E Tracelink, Руководство пользователя, Страница: 26 / 39

Tracelink User Manual 23
( 1) Drop-down Box 1
There are two options available in this drop-down box: "Ethernet Port" and
"USB Port". Changing to any one of these Ports will list the devices which are
found over that specific Port.
(2) Drop-down Box 2
Once one of the communication interfaces (USB or Ethernet) has been
selected in the first drop-down box, a list of all available Tracelink devices over
that interface will be displayed for selection.
(3) Close Button
The “Close” button is active only when a device has been opened for access.
Once a device has been opened for access, it needs to be closed before
another device can be opened for access.
(4) Open Button
The “Open” button opens a device for access. This is a required step before
changing the parameters on the selected device. Once a device has been
selected through the second drop-down box and is opened for access, its
information will be displayed at the bottom of the dialog box.
(5) Refresh List
Will refresh the dialog boxes by searching for devices which are currently
connected via the USB or Ethernet interfaces.
(6) Tracelink IP Number
This is the IP number which will be associated with the Tracelink. It needs to
be a unique IP number which can be accessible on the network.
(7) Tracelink Device Name
This is a label which can be used to identify the Tracelink by name, e.g.,
“John’s Tracelink.”
(8) MAC Address
This is the Media Access Control address, the unique number of an Ethernet
device on the network. This is programmed by P&E and cannot be modified.
(9) Gateway IP Number
The IP number of a gateway on the network.
(10) Subnet Mask
The subnet mask of the network.