Freescale Semiconductor P&E Tracelink, Руководство пользователя, Страница: 25 / 39

Tracelink User Manual 22
Assuming the desktop’s IP number to be 192.168.100.1, this is an example of the
three IP numbers that would need to be programmed into the Tracelink:
IP Number Gateway IP Subnet Mask
PC 192.168.100.1 none 255.255.255.0
Tracelink 192.168.100.2 192.168.100.1 255.255.255.0
For more information on programming these IP numbers into the Tracelink device,
please see the following section.
5.5 Tracelink IP Setup Utility User Interface (ConfigureIP)
Before the Tracelink device transacts data on an Ethernet network, it will need to be
configured with the relevant network parameters. The application that provides this
capability is the Tracelink IP Setup Utility (ConfigureIP), which can be found as part of
the distribution software.
This utility is used to configure the Tracelink with network parameters, and also to
update the firmware of the Tracelink.
Figure 5-1: IPSetup.exe Default Screen