VI. SAFETY WARNINGS & INSTRUCTION LABELS
31
If you're not able to move, your rear wheel is probably caught. Reverse and try again. Take
your time. Relax, enjoy yourself. The techniques described above will take some practice.
Practice makes perfect. Remember, your wheelchair can do the work without wearing you
out!
MOVING ON AN INCLINE
More and more buildings have ramps for wheelchair access. Some have a change of direction
in the middle. Good cornering skills are required. First, make a wide turn with your caster
wheels around tight corners, so that your back wheels follow a wide arc to stay clear of
the corner. If you stop while going uphill, the automatic parking brake will keep you safe.
To start again, slowly depress the forward direction joystick lever. The parking brake will
release and you will start to move again.
Remember: When you approach an upward incline, it is best to lean forward, (FIG 6).
This moves the centre of gravity of your wheelchair towards the front of the wheelchair
for improved stability. When going down an incline, keep your speed slow. This will keep
you in a safely controlled descent. It is recommended for you to lean backwards as you
descend. If you wish to stop completely, release the joystick lever, and you will come to a
gentle stop. For your safety, always avoid sudden stops and starts.
DO NOT exceed the incline guidelines or any other specifications
presented in this manual.
CONTROL TRAVEL OVER STATIONARY OBSTACLES
Stationary obstacles (steps, curbs, etc.) must be avoided where possible. wheelchair has a
ground clearance of 1.22 inches (3.1 cm). Proceed with extreme caution when driving near
raised surfaces. Unprotected ledges and/or drop-offs such as curbs, porches, stairs etc. should
be avoided.
Most new pavements have wheelchair access ramps at intersections. Plan your route where
possible to avoid poor and uneven surfaces. DO NOT attempt to ride up or down curbs as
you will damage the integrity of your wheelchair.
Warning!
CURB
CURB
Содержание FR-W04
Страница 1: ...FR W04 ...
Страница 48: ...48 XII TECHNICAL SPECIFICATION ...
Страница 55: ...2018 9 V3 ...