Freemotion SFTL90009.0 Скачать руководство пользователя

Страница: 16 / 36

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to

cold temperatures, allow it to warm to room tem-

perature before turning on the power. If you do not

do this, you may damage the console displays or

other electrical components.

Plug in the power cord (see

page 14). Next, locate the

reset/off circuit breaker on

the treadmill frame near the

power cord. Make sure that

the circuit breaker is in the

“reset” position.

IMPORTANT: The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. If the displays light as soon as

you plug in the power cord and switch the reset/off

circuit breaker to the reset position, the demo

mode is turned on. To turn off the demo mode,

hold down the Stop button for a few seconds. If the

displays remain lit, see THE INFORMATION MODE

on page 22 to turn off the demo mode.

Next, stand on the

foot rails of the

treadmill. Locate

the clip attached to

the key (see the

drawing at the

right), and slide

the clip securely

onto the waistband

of your clothes. Then, insert the key into the console.

After a moment, the displays will light.

IMPORTANT:

In an emergency situation, the key can be pulled

from the console, causing the walking belt to slow

to a stop. Test the clip by carefully taking a few

steps backward; if the key is not pulled from the

console, adjust the position of the clip.

Note: The console can display speed and distance in

either miles or kilometers. To find out which unit of

measurement is selected or to change the unit of mea-

surement, see THE INFORMATION MODE on page

22. For simplicity, all instructions in this section refer to

miles.

HOW TO USE THE MANUAL MODE

1. Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2. Select the manual mode.

Each time the key is in-

serted, the manual mode

will be selected. If you

have selected a workout,

press any of the speed

workout buttons (Wt.

Loss, Aerobic, Performance, or Endurance) repeat-

edly until a track appears in the matrix.

3. Start the walking belt and adjust the speed.

To start the walking belt, press the Start button,

one of the Speed increase buttons, or one of the

speed buttons numbered 1 to 12.

If you press the Start button or one of the Speed

increase buttons, the walking belt will begin to

move at 1 mph. As you exercise, change the

speed of the walking belt as desired by pressing

the Speed increase and decrease buttons on the

console or in the right handrail. Each time you

press a button, the speed setting will change by

0.1 mph; if you hold down the button, the speed

setting will change in increments of 0.5 mph. If you

press one of the numbered speed buttons, the

walking belt will gradually change speed until it

reaches the selected speed setting.

To stop the walking belt, press the Stop button. To

restart the walking belt, press the Start button, one

of the Speed increase buttons, or one of the num-

bered speed buttons.

4. Change the incline of the treadmill as desired.

To change the incline of the treadmill, press one of

the Incline increase or decrease buttons or one of

the incline buttons numbered 0 to 12.

Each time you press one of the Incline increase or

decrease buttons on the console or in the left

handrail or one of the numbered incline buttons,

the incline will gradually change until it reaches the

selected incline setting.

Reset

Clip

Key

Содержание SFTL90009.0





































Результаты поиска

Содержание SFTL90009.0

Отзывы:

Похожие инструкции для SFTL90009.0

Бренды по названию

Популярные бренды

Freemotion SFTL90009.0, Руководство пользователя

Результаты поиска

Содержание SFTL90009.0

Отзывы:

Похожие инструкции для SFTL90009.0

Бренды по названию

Популярные бренды