7
2. Slide the Upright Cover (87) onto the bottom of
the Upright (86) as shown.
Have a second person hold the Upright (86)
near the Base (94).
See the inset drawing.
Tie the wire tie in the
Upright (86) securely around the end of the
Upright Wire (79). Then, pull the other end of the
wire tie until the Upright Wire is routed com-
pletely through the Upright.
86
1.
Make sure that the power cord is unplugged.
Attach the Right Wheel Cap (90) to the Base
(94) with two #8 x 3/4" Screws (2).
Attach the Left Wheel Cap (not shown) to the
left side of the Base (94) in the same way.
Cut the shipping tie holding the Upright Wire
(79) to the Base (94).
1
2
90
Wire
Tie
94
94
Hole
87
86
79
79
Wire
Tie
Hole
2
79 Tie
