Freemotion SFTL18910.1 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 32

background image

22

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that

applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION:

a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 13). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 13.

IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the power switch located on the treadmill

frame near the power cord. If the switch protrudes

as shown, the switch has tripped. To reset the

switch, wait for five minutes and then press the

switch back in.

PROBLEM: The power turns off during use

SOLUTION:

a. Check the power switch (see the drawing above). If the switch has tripped, wait for five minutes

and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for

five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console.

d. If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION:

a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE

INFORMATION MODE on page 19 to turn off the demo mode.

PROBLEM: The displays of the console do not function properly

SOLUTION:

a. Remove the key from the console and

UNPLUG

THE POWER CORD.

Remove the four #8 x 3/4"

Screws (2). Carefully pivot the Motor Hood (67) off.

Tripped

Reset

c

67

2

a

2

2

2

«
...
20
21
22
23
24
...
»

Содержание SFTL18910.1

































Отзывы:

Нет отзывов

Похожие инструкции для SFTL18910.1

NordicTrack S20i

Бренд: ICON Health & Fitness Страницы: 36

Greenwalk DVL7001

Бренд: DUVLAN Страницы: 31

Бренд: Life Fitness Страницы: 22

Бренд: Johnson Fitness Страницы: 35

Бренд: True Страницы: 42

Бренд: True Страницы: 59

Бренд: Life Fitness Страницы: 57

Cadence 90 Treadmill

Бренд: Weslo Страницы: 28

Бренд: Weslo Страницы: 21

1280 Premier ES

Бренд: Pro-Form Страницы: 32

Бренд: Pro-Form Страницы: 32

Бренд: CIRCLE FITNESS Страницы: 20

Бренд: Freemotion Страницы: 39

Бренд: Pro-Form Страницы: 18

330 RT PETL40131

Бренд: Pro-Form Страницы: 23

Бренд: 100FIT Страницы: 44

Бренд: 100FIT Страницы: 43

NordicTrack S 40

Бренд: ICON Health & Fitness Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды