8
4
4. While a second person holds the Seat Frame
(18) near the Seat Carriage (11), connect the
wires (A) in the Seat Frame to the wires (B) in
the Seat Carriage. Insert the excess wire into the
Seat Carriage.
Tip: Avoid pinching the wires. Attach the Seat
Frame (18) to the Seat Carriage (11) with an
M8 x 40mm Screw (105), an M8 Bright Split
Washer (148), and an M8 x 25mm x 1.5mm
Washer (142); do not fully tighten the Screw
yet.
Finish attaching the Seat Frame (18) with two
M8 x 40mm Cap Screws (145), two M8 Split
Washers (77), and two M8 x 16mm x 2mm
Washers (143); fully tighten the M8 x 40mm
Cap Screws (145) and the M8 x 40mm
Screw (105).
5
5. Attach the Seat Frame Plate (35) to the Seat
Carriage (11) with four M8 x 12mm Seat Screws
(125), four M8 Split Washers (77), and four
M8 x 16mm x 1mm Washers (80) (only one side
is shown); start all the Seat Screws, and then
tighten them.
18
35
80
77
125
11
11
A
B
142
77
105
145
143
Avoid pinching
the wires
148
