6
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• If a part is not in the hardware kit, check to see if
it has been preassembled.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 5.
• The following tools (not included) are required for
assembly:
one adjustable wrench
one Phillips screwdriver
a set of metric hex keys
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1
1. Identify the Rear Stabilizer (37), which does not
have wheels, and orient it as shown.
Attach the Rear Stabilizer (37) to the Frame (1)
with two M8 x 25mm Cap Screws (138), two
M8 Split Washers (77), and two M8 x 16mm x
1.5mm Washers (110).
138
77
77
110
37
1
110
138
