6
1. Orient the Base (2) as shown.
Attach the Base (2) to the Tower (1) with six M12
x 25mm Screws (68) and six M12 Washers (73);
start all the Screws, and then tighten them.
ASSEMBLY
• Because of its weight and size, assemble the
strength equipment in the location where it will be
used. Make sure that there is enough clearance
around the strength equipment.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Assembly requires a set of metric hex keys. To
avoid damaging parts, do not use power tools.
73
73
73
68
68
68
1
2
1