21
If desired, adjust the volume by pressing the Vol
increase and decrease buttons on the console.
To pause the workout, touch one of the menu but-
tons or press the Stop button on the console. To
continue the workout, touch the Resume button or
the Start button. To end the workout, touch the End
Workout button.
6. Measure your heart rate if desired.
Note: If you use the handgrip heart rate moni-
tor and the optional chest heart rate monitor at
the same time, the console will not display your
heart rate accurately. For information about the
chest heart rate monitor, please call the number on
the back cover of this manual.
Before using
the handgrip
heart rate mon-
itor, remove
the sheets of
plastic from the
metal contacts.
In addition,
make sure that
your hands are
clean.
To measure your heart rate, stand on the foot
rails and hold the contacts with your palms for
approximately ten seconds; avoid moving your
hands. When your pulse is detected, your heart
rate will be shown. For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
7. Turn on the fan if desired.
The fan features multiple speed settings and an
auto mode. When the auto mode is selected,
the speed of the fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Press the Fan increase button to increase the fan
speed. If you press the Fan increase button once
while the fan is on its maximum speed setting,
the auto fan mode will be selected. Press the Fan
decrease button repeatedly to decrease the fan
speed or to turn off the fan.
8. When you are finished exercising, remove the
key from the console.
Step onto the walking platform and touch the home
button or the back button on the screen or press
the Stop button on the console. A workout sum-
mary will appear on the screen. After you view
the workout summary, touch the Finish button to
return to the main menu. You may also be able to
either save or publish your results using one of the
options on the screen. Then, remove the key from
the console and put it in a secure place.
When you are finished using the incline trainer,
press the power switch into the off position and
unplug the power cord. IMPORTANT: If you do
not do this, the incline trainer’s electrical com-
ponents may wear prematurely.
Contacts
