32
PREVENTIVE MAINTENANCE
Regular maintenance is necessary for optimal perfor-
mance and long life of the incline trainer. Please read
and follow all instructions below.
If you have questions,
see the back cover of this manual.
WEEKLY MAINTENANCE
1.
Unplug the power cord.
Inspect and properly
tighten all external parts of the incline trainer.
2.
Apply a mild multi-purpose cleaner to a 100 per-
cent cotton cloth and remove any dust and grime
from the handrails, uprights, foot rails, frame, and
motor hood. In addition, wipe the walking platform
along the sides of the walking belt.
Do not use
cleaners under the walking belt.
Then, apply a
small amount of the cleaner to a second cloth and
wipe the console and the screen(s).
Do not spray
cleaner directly onto the incline trainer or use
ammonia or acid-based cleaners.
3. Vacuum the area around the incline trainer.
4.
Make sure that the walking belt is centered and
properly tightened (see pages 37 and 38). If
it is centered and runs smoothly, do not make
any adjustments. If the walking belt needs to be
adjusted, see pages 33 and 34.
MONTHLY MAINTENANCE
1. Turn on the incline trainer, and set the incline to
30%.
2.
Unplug the power cord.
Next, remove the 3/8" x
1 1/4" Screws (37), and lift off the Motor Hood (75).
3.
Using a hand-held vacuum, clean the area that
was under the motor hood.
Be careful to avoid
touching any components.
Then, check the
Drive Motor Belt (82) for wear, cracks, dust
buildup, and proper tension. If the Drive Motor Belt
needs to be replaced, please see the back cover of
this manual.
4.
Lift the edge of the walking belt and slide your
hand between the walking belt and the walking
board. If the underside of the walking belt is dry,
you may need to apply more lubricant (see the
back cover of this manual).
5.
Plug in the power cord and insert the key into
the console. Press the Start button.
Be careful
to avoid injury; keep your hands away from
moving parts and make sure that your clothes
cannot become caught in moving parts.
While
the walking belt is moving, check the incline trainer
for unusual noises or odors. If any of these prob-
lems exists, please see the back cover of this
manual.
Remove the key and unplug the power
cord. See drawing 2 above.
Reattach the Motor
Hood (75) with the 3/8" x 1 1/4" Screws (37).
37
75
2
37
82
3
WARNING:
If all maintenance
procedures are not performed as described,
components may wear excessively, the incline
trainer may become damaged, a risk of injury
or a risk of fire may result, and the warranty
will be voided.
