freeView Pro C80H User’s Manual
4 Operation
4.1 Logging Into the Console
Once the freeView Pro C80H is powered on, it will prompt you for a password to access the
console. The default password is “00000000”. Remember to change the password using the on-
screen display (OSD) immediately to prevent unauthorized access to the unit.
4.2 Hot
Keys
You can control the operation of the KVM using hot keys. Hot key commands are initiated by
pressing the “Scroll Lock” key twice in succession followed by the desired command. Refer to
the table below for a list of available commands.
Figure 4-1: Hot Key Command List
Notes:
•
If you enable scan mode, the KVM switch will cycle through all active ports one at a time.
The scan interval can be set through the On-Screen Display (OSD) (see next section for
details). If Beeper is turned on, the KVM will beep each time it skips to the next computer.
17
