15
Federal Communications Commission (FCC) Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Reorient or relocate the receiving antenna.
-
Consult the dealer or an experienced radio or television technician for help.
CAUTION:
Changes or modifications not expressly approved by Freedom Scientific could void the user’s authority to operate the equipment.
Industry Canada (IC) Compliance Statement
CAN ICES-3(B) / NMB-3(B)
Regulatory Compliance
-
Wavelengths:
400 nm to 780 nm
-
Power:
100-240V~ 1A 47-63Hz
-
Safety:
IEC 60950-1 IEC 60950-1 / UL 60950-1 / CSA C22.2.60950-1 / EN 60950-1: 2006 + A11:2009 + A1:2010
-
EMC:
FCC (CFR-47, part 15) Class B; Industry Canada ICES-003; EN 55022 Class B; EN 55024
Safety and Maintenance
Do not stare at the lamp as it may be harmful to the eyes.
Содержание TOPAZ EZ
Страница 4: ......
