6
Power and Monitor Adjustments
1.
Plug the
power cord
from the middle power connector on the rear of the TOPAZ to an
electrical wall outlet.
2.
Press the
white main power switch
located near the LED reading light on the right side
of the TOPAZ.
3.
Press the
green
standby power switch
on the right side of the control panel.
Note:
If the monitor screen remains blank, make sure that the monitor is turned on.
4.
Hold the sides of the monitor with both hands and move it up or down to change the
height, or turn the monitor left or right to adjust the angle for the best view.
If the monitor does not move to the left or right, make sure to release the arm lock (push
the locking pin in) located at the base of the monitor arm. Also, make sure that the monitor
is raised up so that it freely moves from left to right.
For arm lock information, refer to
Transporting and Moving the Unit
as previously
mentioned on page 3.
Содержание TOPAZ EZ
Страница 4: ......
