Free Spirit C 249 30186 0, Руководство пользователя

Страница: 26 / 35

25
MAINTENANCE INSTRUCTIONS
CLEANING
WARNING: Always unplug your treadmill prior to cleaning or servicing your unit, in order to avoid
electrical hazard or shock.
Care has been taken to assure that your treadmill has been properly adjusted and lubricated at the factory. It is
not recommended that the user attempt service on the internal components instead seek service from an
authorized service center. However, from time-to-time the outer surfaces may appear dull or dirty, following
the instructions listed below will restore and preserve the original finish.
Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth rag with a light application
of car wax. Do not use aerosol sprays or pump bottles as they may deposit wax upon the walking or computer
surface.
Under no circumstances are you to use ammonia, oils, silicones or any other compounds on the rubberized
walking surface. The use of such materials may cause serious injury to the body and/or deteriorate the
performance of the walking surface. Only clean the rubberized walking surface with a damp cloth (water only).
From time-to-time the computer surface may collect dust or fingers prints. The use of harsh chemicals will
destroy the protective coating and cause a static build up that will damage the components. This surface may
be cleaned with specially prepared chemicals found in most computer supply stores especially made for anti-
static surfaces. It is strongly recommended that you purchase such a cleaning compound.
At least once a year remove the motor cover and vacuum under the motor cover. Warning: Always unplug
the treadmill from the electrical outlet before removing the motor cover.