Fred’s Lab TOORO, Руководство пользователя и обслуживания

Страница: 31 / 66

6.8 Envelopes 6 PRESET PARAMETERS
6.8.4 Release Time
Sets the time to fall from the sustain level to 0 after the trigger is released.
6.8.5 Velocity Amount
This parameter allows to control the overall modulation amount of the envelope via the
note velocity. If set to 0, velocity has no effect on the envelope depth. If set to higher
values, the amount of velocity sensitivity gradually increases.
6.8.6 Hold Time
The T¨ o¨ or¨ o’s envelopes have an additional hold stage, whose time can be controlled by
this parameter. Setting its value to 0 completely disables the hold stage and the envelope
works like a normal ADSR envelope. Increasing the parameter, introduces a hold time
after the attack stage where the signal is kept at maximum before the decay stage is
entered.
6.8.7 Aftertouch Amount
To offer more control over the sustain stage, its level can be modulated via aftertouch.
This parameter defines how much the sustain level is affected by the aftertouch amount.
If set to 0, aftertouch has no effect and sustain works in a normal way. On higher settings,
the sustain is increasingly affected by the keyboard aftertouch.
6.8.8 Trigger Mode
The trigger mode sets the behaviour of the envelope when a new note is started while it
is still running on a previous note.
Always restart from the attack stage with level 0.
Never retrigger. Stay at whatever level/stage it was
before the voice was reused.
Continue. Always restart in the attack stage using the
last level.
The Never and Continue modes are especially useful in mono mode or when a lot of
voice stealing is happening. In these cases they allow less static playing schemes.
31