Fred’s Lab TOORO, Руководство пользователя и обслуживания

Страница: 20 / 66

6.3 Oscillators 6 PRESET PARAMETERS
6.3 Oscillators
The T¨ o¨ or¨ o has two identical wavetable oscillators that build the heart of the sound
engine. Each oscillator generates a blended waveform that is determined by the content
of the selected wavetable. In addition, FM modulation and auto-sync is possible within a
single oscillator to produce alterations of the harmonic content.
To access the oscillators parameters, press the OSC module button. If
you press the button more than once, the selection will cycle between Osc
1 and Osc 2. The LED color indicates which oscillator is selected:
Osc 1 Osc 2
In addition, the display will show the selected oscillator briefly:
Osc 1 Osc 2
In normal mode, the Wave, Coarse Tune, FM Amount and Level parameters can be
edited via the first and second encoder. To edit the Table, Fine Tune, FM Rate and
Sync parameters, alternate mode has to be enabled via the ALT button.
6.3.1 Wave
Sets the play position inside the selected wavetable. You can modulate this parameter via
the modulation matrix in order to bring movement into your sound.
6.3.2 Table
This parameter selects the wavetable that is used by the oscillator. In conjunction with
the
Wave setting, it is the most important control to define the basic tone.
Each wavetable consists of a combination of 4 waveforms that are blended to create a
smooth transition. The following 16 waveforms are available to build these combinations:
ˆ
Sawtooth
ˆ
Square
ˆ
Triangle
ˆ
Sine
ˆ
Blue Noise
ˆ
Brown Noise
ˆ
Metal overtones
ˆ
Bell like
ˆ
Double Saw
ˆ
Double Square
ˆ
Organ,
ˆ
Prime numbers
ˆ
Formant A
ˆ
Formant E
ˆ
Formant O
ˆ
Grin
20