Fred’s Lab TOORO, Руководство пользователя и обслуживания

Страница: 12 / 66

4 INSTRUMENT OPERATION
4 Instrument Operation
Once the instrument is properly installed and you can hear some sounds when playing
notes, let’s have a good look at its panel:
4.1 Connectors
A USB - 5V
This is the USB-B connector for both power and MIDI over USB function. It must be
attached to a source to power up the
T¨ o¨ or¨ o .
B MIDI IN
This is the MIDI DIN input connector for a MIDI compatible controller or sequencer. It
should be attached to a MIDI DIN output connector of an other device.
C MIDI OUT
This is the MIDI DIN output connector to be connected to a sequencer, computer or sub-
sequent machines. All incoming messages that are not parsed by the
T¨ o¨ or¨ o are forwarded
to this output.
D VOICES 1&2 / 3&4
These are separate TRS jacks hardwired to voices 1-4 for individual processing. Signal of
voices 1/3 will appear on the tip, voices 2/4 on the ring of the connector. Note that the
voices are not cut from the main outputs when a cable is plugged in.
12