Fred’s Lab TOORO, Руководство пользователя и обслуживания

Страница: 13 / 66

4.2 Controls & Indicators 4 INSTRUMENT OPERATION
E F LEFT & RIGHT
These are the main outputs to be connected to a mixing desk, audio interface of power
speaker system.
4.2 Controls & Indicators
1 Power Switch
Switches the power on or off.
2 Module Buttons & LEDs
Selects the module edited by the parameter encoders. Pressing the same buttons several
times cycles through all available modules of a section. The LED color shows which module
is currently selected corresponding to the panel labeling.
3 SYSTEM Button
Allows access to the advanced functions. This button is used in conjunction with the
parameter encoders and the module buttons.
4 ALT Button & LED
Used to access the alternate functions and synthesis parameters labelled in inverse printing.
Pressing this button toggles between normal and alternate mode.
Alternate mode is
indicated with the LED lit.
5 VOL/BAL Button
Holding this button while turning one of the encoders sets the volume or balance for a
part. In normal mode, volume is set. To set the balance, enable the alternate mode via
the
ALT button.
6 POLY LED
If lit, the currently selected part is in polyphonic mode. Otherwise, the part is set to
monophonic mode. Double-click the
VOL/BAL button to toggle the mode.
7 Parameter Encoders & LEDs
Changes the value of sound or system parameters.
8 PGM LED
Indicates if modulation matrix programming mode is enabled.
9 EXIT Button
Exits matrix programming mode and returns to normal operation. Also, holding the
EXIT button and pressing the PRESET button reloads the currently saved preset /
multi (depending on ALT ), discarding all modifications made.
13