11
®
P
When the command ‘p’ is used alone the Function button is activated. If p is
followed by a number from 1-10 the function is changed according to the diagram
below:
p1 = V
p2 = A
p3 = VA
p4 =
f
p5 = Hz
p6 = W
p7 = Ws
p8 = Wh
p9 = time (s)
p10 = time (h)
The command ‘p6’ will e.g. alter the function - measurement of active power (W)
R
Activates the ”Reset” button (4).
S
Returns: The function selected
Displayed data
Start conditions
Log layout
Logging status (‘Rdy/On/Off)
Message status (On/Off)
Time status - EMT/ESMT
T
Read (internal) clock.
V
Returns the version number e.g.: ”Watt- & Energy meter English version 3.0”
W
Set the (internal) clock. On request type new data.
?
Returns the help-menu listing the following commands:
‘A’ or ‘a’: read datalog
‘B’ or ‘b’: baud-rate (e.g. b300)
‘D’ or ‘d’: returns data (e.g. d1 returns V)
‘G’ or ‘g’: returns set-up line
‘H’ or ‘h’: write set-up line
‘L’ or ‘l’:
set datalog
‘M’ or ‘m’: messages on
‘N’ or ‘n’: no messages (default)
’O’ or ’o’: shows data line
‘P’ or ‘p’: select function (e.g. p6 = select W)
‘R’ or ‘r’: activate ”Reset” button
‘S’ or ‘s’: returns Instrument status
‘T’ or ‘t’:
read clock
‘V’ or ‘v’: returns version no.
‘W’ or ‘w’: set clock
‘^A’ :
activate automatic EMT/ESMT
‘^O’ :
automatic EMT/ESMT inactive
