TH4C Installation Guide
p. 38
TH4C Advanced Configuration
© Safe Fleet | May 2019 | All rights reserved
Document Number: XE-SNB2-TH4CPM-R0A
Advanced Network Settings
Configuring Advanced Settings
Use the Advanced Settings (vMax Live Plus) tab to set up the DVR to connect with vMax Live Plus via a cellular modem.
For more information, see the resources available on the vMax Live Plus
To configure Advanced Settings:
1. Select
Network
Advanced
to open the tab.
2.
Configure settings as required. For details, see
Menu
Options
, below.
3. Click
Back
to save settings, then click Back again to return
to the Configuration menu.
ITEM
DESCRIPTION
VALUE [DEFAULT]
Integrated VML
(vMax Live)
Set ON to enable the integrated VML feature. OFF disables the integrated
VML feature.
[OFF], ON
LAN Range
If the customer network is outside of the DVR network: set the customer
network’s LAN range as determined by a qualified network expert.
Note: There must be a value in this field. If not used, enter a dummy IP
address such as 10.10.0.0.
[0.0.0.0]
LAN Subnet
Mask
Set the LAN subnet mask used for the LAN Gateway Destination range as
determined by a qualified network expert. Use a value between 0 and 32.
[16]
iVML IP
Address
Enter the iVML IP Address as determined by a qualified network expert.
[172.30.2.2]
Menu Options
A qualified IT administrator is required to perform network configuration, including assignment of IP addresses
.
A cellular modem or gateway must also be installed and configured.
Contact FRC Engineering Services or Technical Support for more information.
NOTE: Qualified IT Administrator Required
i
Содержание TH4C
Страница 2: ......
