FRC TH4C, Руководство по установке

Страница: 37 / 47

TH4C Installation Guide
p. 37
TH4C Advanced Configuration
© Safe Fleet | May 2019 | All rights reserved
Document Number: XE-SNB2-TH4CPM-R0A
To configure Network Settings:
1. Select
Network
to open the tab.
2. Configure settings as required. For details, see Menu
Options , below.
3. Click Back to save settings, or click Camera to configure
resolution, recording speed/quality, and other camera options.
ITEM DESCRIPTION VALUE [DEFAULT]
Setting
Type
Contact your administrator to configure the setting type and IP address.
OFF disables all Ethernet capability.
Static IP is a permanent address on the network, assigned by the
network administrator. DHCP (Dynamic Host configuration Protocol)
automates the assignment of IP addresses in a network.
If DHCP is used, the subnet mask, default gateway, and DNS server
are configured automatically, and only the HTTP Port field is editable.
[Static IP], OFF, DHCP
IP Address Enter the DVR IP Address, as determined by a qualified network expert. [169.254.1.1]
Subnet
Mask
Enter the Subnet Mask, as determined by a qualified network expert. [255.255.0.0]
LAN
Gateway
Gateway address uniquely identifies a host or computer on the LAN,
which connects the subnet to other networks. Enter the LAN Gateway,
as determined by a qualified network expert.
[169.254.1.1]
DNS Server Uses an IP address composed of four octets, separated by decimals. [0,0,0,0]
MAC
Address
MAC (Media Access Control) is the DVR's unique hardware number. Fixed
HTTP Port Typically, leave the HTTP Port set to 80, unless otherwise instructed
by IT personnel.
80
Menu Options