24
Read these instructions completely and carefully
WARNING!
INSTALLATION SAFETY INSTRUCTIONS (cotinued)
The ventilating hood must be constructed
of sheet metal not less than 0.0122
(0,31 mm) thick. Install above the cooktop
with a clearance of not less than ¼
(6,35 mm) between the hood and the
underside of the combustible material
or metal cabinet. The hood must be at
least as wide as the appliance and
centered over the appliance. Clearance
between the cooking surface and the
ventilation hood surface
MUST NEVER
BE LESS THAN 24 INCHES (610 mm).
If cabinets are placed above the range,
allow a minimum clearance of 30
(762 mm) between the cooking surface
and the bottom of unprotected cabinets.
If a 30 (762 mm) clearance between
cooking surface and overhead
combustible material or metal cabinets
cannot be maintained, protect the
underside of the cabinets above the
cooktop with not less than ¼ (6,35 mm)
insulating millboard covered with sheet
metal not less than 0.0122 (0,31 mm)
thick.
Clearance between the cooking surface
and protected cabinets
MUST NEVER
BE LESS THAN 24 INCHES (610 mm).
The vertical distance from the plane of
the cooking surface to the bottom of
adjacent overhead cabinets extending
closer than 1 (25 mm) to the plane of
the range sides must not be less than
18 (457 mm). (See the
Dimensions and
Clearances
illustration in this section).
CAUTION:
Items of interest to children
should not be stored in cabinets above
a range or on a backsplash of a
rangechildren climbing on the range to
reach items could be seriously injured.
Safety Instructions
Operating Instructions
Care and Cleaning
Inst
allation Instructions
Troubleshooting
Ti
ps
All manuals and user guides at all-guides.com
