Franklin Thalia, Руководство пользователя, Страница: 9 / 13

Page 5 Addendum for Franklin Manual: Thalia Model
allotment then you will need to start
back at the beginning.
•
You cannot use passcodes with all
the same numbers, for example [1]
[1] [1] [1]
• During use if an incorrect passcode
has been entered in after 3
consecutive tries the keypad will
stop for 90 seconds before you can
continue
•
The outdoor keypad can work with
up to 10 openings and therefor has
10 channels available
Programming the Keypad
Each opener needs its own channel to
operate. Opening 1 is Channel 1 and Opening
2 is Channel 2 and so on. The default code
per each channel is the channel number.
For example, Channel 1 is [1] [1] [1] [1] and
Channel 5 is [5] [5] [5] [5].
1.
Press and hold
the [ON] button on the
keypad until the red LED
light comes on
2. Press [1] [1] [1]
[1]
•
Press [ON]
•
Red LED light will blink
3. On your control unit’s control board
press [OK] four times
• Press [-] until the display reads
“rAdio”
•
Press [OK] and the display will
read “Add StArt”
•
Press [OK]
4. Press [ON] on the keypad
•
Green LED will blink twice
•
Wait 5 seconds
Changing the Default Code for Channels
5. To change the
default code
press and hold
[ON] button on
the keypad
• Make sure
red LED light
is on
•
Press [1] [1] [1] [1]
•
Press [OK]
• Red LED light will be fixed and
green LED will blink
6.
Enter the desired 4-digit code sequence
•
Press [OK]
•
Red LED light will be fixed and
green LED will blink
7.
Repeat step #6 to confirm new code
•
Green LED light will be fixed
Additional Codes
1. Press and hold the [ON] button on the
keypad until the red LED light is on
2. Press [1] [2] [3] [4]
•
Press [OK]
•
Red LED light will be fixed and
green LED will blink
3. Enter the current Channel 1 passcode
• Press [OK]
• Red LED light will be fixed and
green LED will blink
4.
Enter the desired 4-digit code sequence
•
Press [OK]
• Red LED light will be fixed and
green LED will blink
5.
Repeat step #4 to confirm new code
•
Green LED light will be fixed
Changing a Current Passcode
1. Press and hold the [ON] button on the
keypad until the red LED light is on
2. Enter current passcode
•
Press [OK]
•
Red LED light will be fixed while
the green LED light blinks
3. Enter the desired 4-digit code sequence
• Press [OK]
SKU: AO-W2-OK