Franklin Thalia, Руководство пользователя, Страница: 5 / 13

Page 1 Addendum for Franklin Manual: Thalia Model
Addendum for Franklin
Manual: Thalia Model
Autoset Programming for Quick Setup
1. Press the [OK] button once
• The display will read “LANG”
(language)
followed by
“ITA” (Italian)
•
Scroll down
using the
minus [-]
button until
you see “ENG”
(English)
displayed
• Then press the
[OK] button
2.
The word “TYPE” will be displayed
briefly
•
Press the minus [-] button until
“IGEA” is displayed
•
Then press [OK]
3.
The next screen will display “N. MOT”
(Number of Motors)
•
Scroll down with the minus [-]
button until “2” is displayed
•
Press [OK]
Note: if only installing one motor, choose “1”
then press OK
4. “DR” (Direction) will now be displayed
for a moment followed by “INT”
(interior)
•
Select “INT” and press [OK]
5. Next “PRESET” will be displayed,
followed immediately by “AR”
(Automatic Residential)
•
Scroll down to “SR” (Semi-
Automatic Residential). This
allows the doors to work like a
typical garage door
•
Press [OK]
Note: AR will cause the doors to automatically
close on their own, SR requires you to press a
button to close.
6.
After selecting your preset, the screen
will display “PROG” (programming) for
a few seconds
•
The screen will then display
“AUTOSET”
•
Be sure the path of
the doors is clear of traffic
and obstructions. Be aware
that the doors will run at full
torque during the process
•
Press [OK] when ready
•
The motors will run full
open and close cycles more
than once (to learn the force
required to open and close
the doors)
•
“OK” will be displayed
•
press the [OK] button to
continue
Note: If the motors do not run and/or “KO” is
displayed press [OK] to display error code.
Check all wiring, fuses, photo eye alignment
and wiring.
Programming the Remotes
1. The display will read “MEM. REMOTES”
(Memorized Remotes)
• immediately followed by
“HIDDEN BUTTON”
•
Firmly press and hold the top
two buttons on your remote
(this is the hidden button)
• When the screen reads
“RELEASE”, release the two
buttons
Make sure the doors
are in the closed
position before
starting Autoset